Screen iPhone stopped working? 📱 Black display, unresponsive to touch, or stuck on one image? These problems occur even in the most reliable Apple models. In this article, we will figure out, Why iPhone Screen May Not Work and How to Fix It.
🔍 Possible Causes of iPhone Screen Malfunction
🔹 1. iOS system crash 🛠
Sometimes the screen may freeze due to operating system errorsThis can happen after an update, installing new applications, or rebooting the device.
📌 How to fix?
✅ Complete forced reboot:
- iPhone 8 and newer: quickly press increase volume, then decrease volume, then hold down the button inclusions (before the Apple logo appeared).
- iPhone 7/7 Plus: press the buttons simultaneously decrease volume And inclusions for 10 seconds.
- iPhone 6s and above: press and hold Home and power buttons until the device is rebooted.
✅ If the problem persists, try update iOS via iTunes.
🔹 2. Discharged or overheated iPhone 🔥
If iPhone does not turn on and does not respond to pressing, maybe he is ran out of battery or overheated.
📌 What to do?
✅ Connect the device to the charger for 15-30 minutes and try to turn it on.
✅ If your iPhone is hot, let it cool down cool down, then try again.
🔹 3. Mechanical damage to the screen 💥
A fall or impact may cause breakage. display or touchscreen. Symptoms:
✔️ Black screen, but the sound and vibration work.
✔️ The display shows cracks or stains.
✔️ Partial sensor failure (does not respond to pressing in certain areas).
📌 Solution:
✅ If the screen is damaged, it is required display replacement in service center.
✅ Contact us rudservice.com.ua - we will install original display in a short time!
🔹 4. Problems with the cable or screen controller ⚙️
Sometimes the problem occurs because faulty display cable or touchscreen controller on the board. This can happen after a fall, exposure to moisture, or improper repair.
📌 How to fix?
✅ Don't try disassemble iPhone yourself – this may make the problem worse.
✅ It is necessary to carry out diagnostics and repairs in the service.
🔹 5. Moisture ingress 💦
Water can cause screen failure or stripes appearing, especially if it's an iPhone does not have moisture protection.
📌 What to do?
✅ Don't turn on your iPhone and do not connect to charging.
✅ Contact us service center rudservice.com.ua For drying and screen recovery.
✅ When to contact the service?
Contact us rudservice.com.ua, If:
🔹 Screen black but iPhone turns on.
🔹 Display flickering, stripes appear.
🔹 Sensor does not respond on touch.
🔹 It happened water ingress or mechanical damage.
📍 Fast diagnostics and high-quality repairs rudservice.com.ua! 🚀
