The touch screen is one of the main features of the iPhone, but sometimes he starts to behave unpredictably:
✔️ Doesn't respond to touch 📵
✔️ Works on its own 👆
✔️ Delays when pressing ⏳
✔️ Part of the screen doesn't work 🔲
Such problems may arise on all iPhone models – from old to newest, including iPhone 15 and iPhone 16. What to do if the sensor is glitching? In this article we will analyze main causes, ways to fix and repair tips.
🔍 The main reasons why the iPhone sensor is glitching
🔹 Physical damage – impacts, falls, pressure on the screen 📉
🔹 Moisture ingress – the sensor may not work properly if moisture gets under the glass 💦
🔹 iOS System Errors – software failures that affect sensor sensitivity ⚙️
🔹 Non-original display – after poor repairs the sensor may not work correctly 🛠
🔹 Overheating or cold – extreme temperatures cause screen lag ❄️🔥
🔹 Screen clutter – Grease stains or dirt may interfere with the normal operation of the sensor ✋
🔹 Battery problems – if there are power failures, the sensor may “freeze” 🔋
📋 How to understand that the sensor is really faulty?
Before you run to the service center, check the sensor on the iPhone by using simple tests:
🔹 Opening applications – if icons open with a delay or spontaneously, the sensor is glitching.
🔹 Checking the keystrokes – try swiping your finger across the entire screen, if some areas do not respond, the problem is in the display.
🔹 Screen Magnification Mode - turn it on and off in "Settings" → "Accessibility".
If there is a problem - it's time to look for a solution!
🛠 What to do if the iPhone sensor is glitching?
1️⃣ Restart your iPhone
🔹 Quick reboot often resolves software glitches that may interfere with the sensor's operation.
✔️ For iPhone X and newer: Press and hold the volume button and the power button, select "Power off".
✔️ For iPhone SE and older models: Just hold down the power button.
After turning on, check if the sensor is working properly.
2️⃣ Update iOS
Sometimes sensor glitches are related to bugs in iOSTo update the system:
📌 Settings → General → Software Update
🔹 If a new version is available, install it.
💡 Important! If the sensor does not respond at all, connect your iPhone to your computer and update it via iTunes (Windows) or Finder (Mac).
3️⃣ Check the operation in safe mode
If the sensor only glitches in certain applications, maybe the problem is in them.
🔹 Try deleting problematic application.
🔹 If it doesn't help, reset the settings: Settings → General → Transfer or reset iPhone → Reset all settings.
4️⃣ Check if your iPhone is overheating
If iPhone is very hot, the sensor may slow down or not work.
💡 Solution:
✔️ Keep your smartphone away from the sun or hot surfaces ☀️
✔️ Leave it off for 10-15 minutes ⏳
✔️ After cooling, check the screen operation
5️⃣ Check if there are any problems with the protective glass or film
Sometimes thick or damaged protective glass and films cause problems with the sensor.
💡 Solution:
✔️ Remove the glass and try using the screen without it.
✔️ If the sensor works better without glass, then the problem was in it.
6️⃣ Check the display for damage
If your iPhone has been dropped or hit, the glass or display may be damaged.
📌 Signs of screen damage:
❌ Stripes, spots, blurred image.
❌ Blackheads or shimmering areas.
❌ Part of the screen does not respond to touch.
💡 If there is physical damage, the screen will need to be replaced at a service center!
🛠 What to do if nothing helped?
If the sensor still glitching, then the problem is more serious. In this case, you should contact professional service center rudservice.com.ua.
🔹 Free diagnostics 📋 – technicians will determine the exact cause of the malfunction.
🔹 Display replacement 🛠 – original spare parts with warranty.
🔹 Water Damage Recovery 💦 – If the problem is caused by water, our experts will clean and restore your iPhone.
🔹 Sensor chip repair 🔧 – if the controller is damaged, it will be replaced with a new one.
📌 Average repair time – from 30 minutes to 2 hours!
💰 How much does it cost to repair an iPhone sensor?
🔹 If the problem is in the software - diagnostics and reflashing for free.
🔹 iPhone Screen Replacement (Original Display):
✔️ iPhone 11 – from 2500 UAH
✔️ iPhone 12 – from 3200 UAH
✔️ iPhone 13 – from 4200 UAH
✔️ iPhone 14 – from 5500 UAH
✔️ iPhone 15 – check with the service
💡 You can find out the exact price by phone or on the website rudservice.com.ua!
🔒 How to avoid sensor problems in the future?
✅ Use only original spare parts – low-quality displays often glitch.
✅ Update iOS – Bug fixes may improve sensor performance.
✅ Protect your iPhone from falls - use case and protective glass.
✅ Don't overheat your phone – Avoid direct sunlight.
✅ Don't drop it into water – even waterproof models can get damaged.
📢 Why should you contact rudservice.com.ua?
🔹 Original displays and components 🔥
🔹 Quick screen replacement – from 30 minutes ⏳
🔹 Guarantee for all work ✅
🔹 Diagnostics free of charge 💰
🔹 Repair without data loss 📲
💡 If your sensor iPhone is glitching – don’t delay the repair! The longer you use a faulty display, the more difficult it will be to repair.
📲 Sign up for a service center rudservice.com.ua right now! 🚀
